주요 학력

- 박사 The Pennsylavania State University, 산업공학 박사

- 석사 Seoul National University, 산업공학 석사

- 학사 Seoul National University, 산업공학 학사

주요경력
2013.12~present    Editor-in-Chief, International Journal of Industrial Engineering: Theory, Applications, and Practice (SCIE)

2011.09~present Associate Professor,
Department of Industrial Engineering
Pusan National University (PNU), Busan, Korea

2014.09~2016.09 Department Head,
Department of Entrepreneurship
Graduate School of Technology Entrepreneurship
Pusan National University (PNU), Busan, Korea

2010.03~2011.08 Associate Professor,
Division of Mechanical and Industrial Engineering
Pohang University of Science and Technology (POSTECH), Pohang, Korea

2005.09~2009.12 Assistant Professor
School of Mechanical, Industrial, & Manufacturing Engineering, Oregon State University, Corvallis, OR, USA

Director,
Nanomaterial-Biological Interactions Laboratory, Safer Nanomaterial and Nanomanufacturing Initiative, US Air Force
ONAMI (Oregon Nanosicences and Microtechnologies Institute) Research Center, Corvallis, OR, USA

2004.01~2005.08
 Assistant Professor
Department of Mechanical and Industrial Engineering, University of Illinois, Chicago, IL, USA

2001.01~2003.12 Chief Executive Officer / Chief Technology Officer
Mohenz Technology, Inc., Stoneham, MA, USA
Area: The development of compression/decompression (CODEC) and streaming technologies for still/moving images.

1999.08~2003.07
 Assistant Professor
Department of Mechanical, Industrial, & Manufacturing Engineering, Northeastern University, Boston, MA, USA

1998.08~1999.06 Assistant Professor
Department of Systems and Industrial Engineering, University of Arizona, Tucson, AZ, USA

수상경력

1. Best Paper Award, “Job Cycle Time Prediction in Semiconductor Manufacturing Process using Fuzzy C-means Based Genetic Algorithm and Back Propagation Network”, 2018 International Symposium on Semiconductor Manufacturing Intelligence (ISMI2018) & 2018 IEEE International Conference on Smart Manufacturing, Industrial & Logistics Engineering (IEEE SMILE 2018), Taiwan, Feb 9, 2018.

2. Best Paper Award, “A bi-x-x-x-x-objective mathematical programming for medical relief shelter location problem”, The Second Global Conference on Theory and Applications of OR/OM for Sustainability, Beijing, China, Sep. 2017.

3. Best Student Paper Award, “Medical Relief Shelter Location Considering the Severity of Patients Under Limited Relief Budget”, The 46th International Conference on Computers & Industrial Engineering, Tianjin, China, Nov. 2016.

4. Best Paper Award, “Lower and Upper Bounds for Military Deployment Planning Considering Combat”, The 17th International Conference on Industrial Engineering, Busan, Korea, Oct. 2013.

5. Best Paper Award, “Spatial Scheduling for Large Assembly Blocks in Ship Building Industries”, The 9th International Conference on Intelligent Manufacturing and Logistics Systems, Shanghai, China, Feb. 2013.

6. Best Research Award, “Algorithm to Optimize the Operations in Large Block Assembly for Ship Building”, Leaders in Industry-University Corporation Research Grant, Korea, Feb. 2013.

7. 2007-2008 Biennial Best Paper Award ? “Optimisation of Process Conditions in Powder Injection Moulding (PIM) of Microsystem Components Using a Robust Design Method. Part I: Primary Design Parameters”, June 2008 (Volume 51, Pages 133-142), Powder Metallurgy, by The Particulate Engineering Committee of the Institute of Materials, Minerals and Mining, UK, 2009.

8. Best Research Award, “An Embryo Zebrafish Metric for Evaluating Nanomaterial-Biological Interactions”, 47th Annual Meeting of the Society of Toxicology, Seattle, WA, Feb. 2008 (coauthored with Harper, S. and Tanguay, R.)

9. Editorial board of International Journal of Experimental Design and Process Optimisation, Inderscience Publishers, ISSN: 2040-2252, 2008.07~present.

10. Program Committee, PICMET ’06, 2006

11. Listed in Who’sWho in America, Marquis, New Providence, NJ, USA, 2008, 2009, 2010

12. Selected as a support recipient for Energy Efficiency and Renewable Energy Workshop on Building Technology, organized by Oak Ridge National Laboratory, sponsored by U.S. Department of Energy (DOE) and National Association of State Universities and Land-Grant Colleges (NASULGC), 2006

13. Selected as supported participant in Material Handling Teachers Institutes (MHTI), organized by University of Louisville and Material Handling Industry of America (MHIA), 2003

14. Selected as supported participant in Workshop on Supply Chain Management Practice and Research: Status and Future Directions, April 18 ? 19, 2001, NIST, NSF, and Robert H. Smith School of Business, University of Maryland., Rockville, MD

15. Selected as supported participant in Workshop on Supply Chain Management, May 12 ? 13, 2000, NSF and Northwestern University. Chicago, IL

논문

[1]R. Vadivel, S. Shanmugam, B. Unyong, P. Hammachukiattikul, Keum-sik Hong and Gyu M. Lee, “Stabilization of Delayed Fuzzy Neutral-type Systems Under Intermittent Control”. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS. 2021. Vol. 19. No. 3, pp. 1408-1425
Mohammad Idil Haq Amir, Fifi Alfiana Rosyidah, Gyu M Lee, “A FORMAL MODEL OF THE AGENT-BASED SIMULATION FOR THE EMERGENCY EVACUATION PLANNING”, International Journal of Industrial Engineering: Theory, Applications and Practice, 2020. Vol 27. No. 4. Pp. 645-664
[2]Saravanan Shanmugam, Syed Ali Muhammed and Gyu M. Lee, “Finite-time extended dissipativity of delayed Takagi-Sugeno fuzzy neural networks using a free-matrix-based double integral inequality”. NEURAL COMPUTING & APPLICATIONS, 2020. Vol 32. No. 12. Pp. 8517-8528
[3]Gao, Xuehong, and Gyu M. Lee. "Moment-based Rental Prediction for Bicycle-sharing Transportation Systems Using a Hybrid Genetic Algorithm and Machine Learning." Computers & Industrial Engineering. 2019. Vol. 128. Pp. 60-69.
[4]Harun Ozturk and Gyu M. Lee. “A PRODUCTION LOT SIZING MODEL CONSIDERING QUALITY CONTROL, REWORK, AND SHORTAGES”. International Journal of Industrial Engineering-Theory, Applications and Practice, 2018. Vol. 25, No. 6, pp. 843-861.
[5]Sungwoo Kim, Youngchul Shin, Gyu M. Lee, Ilkyeong Moon. Network repair crew scheduling for short-term disasters. Applied Mathematical Modelling, 2018. Vol. 64, pp510-523.
[6]Gu J, Zhou Y, Das A, Moon I, Lee GM. ?Medical relief shelter location problem with patient severity under a limited relief budget. Computers & Industrial Engineering. 125,pp 720-728, 2018.
[7]Kim, S., Shin, Y., Lee, G.M. and Moon, I. Early stage response problem for post-disaster incidents. Engineering Optimization, 50(7), 1198-1211, 2018.
[8]Zhou Y, and Gyu M. Lee. ?Linking soft computing to art: introduction of efficient k-continuous line drawing. Applied Soft Computing. Vol. 68, pp. 932-943, 2018.
[9]Tuladhar, U. M., Gyu M. Lee, and Seokyoung Ahn. "A novel coarse-to-fine registration approach for aligning partially overlapped 3D scanned data." International Journal of Computer Integrated Manufacturing. 31(8), 718-726, 2018.
[10]Xuehong Gao, Yanjie Zhou, Muhammad Idil Haq Amir, Fifi Alfiana Rosyidah, Gyu M. Lee, “A Hybrid Genetic Algorithm for Multi-emergency Medical Service Center Location-allocation Problem in Disaster Response”, International Journal of Industrial Engineering-Theory, Applications and Practice, Vol. 24, No. 6, pp. 663-679, 2017.
[11]Yanjie Zhou,Gyu M. Lee, “A Lagrangian Relaxation-Based Solution Method for a Green Vehicle Routing Problem to Minimize Greenhouse Gas Emissions”, Sustainability, Vol. 9, No 5, pp. 776:1-17, 2017.
[12]Dong Yong Park, Gyu M. Lee, Young-Sam Kwon, Yong Jun Oh, Seong Lee, Myeong-Sik Jeong and Seong Jin Park, “Investigation of Powder Size Effects on Sintering of Powder Injection Moulded 17-4PH Stainless Steel”, Powder Metallurgy, Vol. 60, No 2, pp. 139-1148, 2017.
[13]Sushanta Tripathy, Satyabrata Aich, Anurup Chakraborty and Gyu M. Lee, “Information Technology is an Enabling Factor Affecting Supply Chain Performance in Indian SMEs: A Structural Equation Modelling Approach”, Journal of Modelling in Management, Vol. 11, No. 1, pp. 269-287, 2016
[14]Kyoungseok Na and Gyu M. Lee, “Agent-based Simulation of Emergency Evacuation for Nuclear Plant Disaster”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 23, pp. 445-448, 2016
[15]Ferrer, Geraldo, Gyula Vastag and Gyu M. Lee. “Supply Chain Decisions in Governmental Organizations”, Decision Sciences, Vol. 47, pp. 995-997, 2016.
[16]Harun Ozturk and Gyu M. Lee, “An Economic Order Quantity Model for Lots Containing Defective Items with Rework Option”, International Journal of Industrial Engineering-Theory Applications and Practice, Vol. 22, pp. 683-704, 2015
[17]Bobae Kwon and Gyu M. Lee, “Spatial scheduling for large assembly blocks in shipbuilding”, Computers & Industrial Engineering, Vol. 89, pp. 203-212, 2015
[18]Ivan Singgih and Gyu M. Lee, “Lower and Upper Bounds for Military Deployment Planning Considering Combat”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 21, pp. 408-420, 2014
[19]Gyu M. Lee, “ System Engineering Approach to Build an Information System for Emergency Cesarean Deliveries.”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 20, pp. 589-600, 2013
[20]K. C. Kim, J.U. Sun and S. Lee, "Endosymbiotic Evolutionary Algorithm to Vehicle Routing and Scheduling with Delivery and Installation ", 2011 (submitted to Flexible Services and Manufacturing)
[21]D.Y. Park, S. Lee, S-J. Park, Y-S. Kwon, and I. Otsuka, “Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder”, Metallurgical and Materials Transactions A, Vol. 44, No. 3, pp. 1508-1518, 2012.
[22]K.H.Kate, V. P. Onbattuvelli, R. K. Enneti, S. Lee, S-J. Park, and S. V. Atre, “Measurement of Powder-Polymer Mixture Properties and Their Use in Powder Injection Molding Simulations for Aluminum Nitride”, Journal of Materials, Vol. 64, No. 9, pp. 1048-1058, Sept. 2012.
[23]N. Monfared, S. Varadarajan, J.P. de Souza, S. Lee, and S.V. Atre, “Effect of Surface Preparation On The Nanoporous Structure of Anodized Alumina”, Tecnologia em Metalurgia, Materials e Minera??o, 2012.
[24]S. Lee, “Dynamic Capacitated Facility Location Problem on the  Multi-Commodity Supply Chain”, Journal of the Korean Institute of Industrial Engineers, Vol. 38, No. 2, pp. 107-115, June 2012.
[25]B. K. Paul, B. S. Abhinkar and S. Lee, "High pressure hermetic compression seals for embedding elastomeric membrane microvalves in polymer microfluidic devices", Precision Engineering, Vol. 35, No. 2, pp. 348-354, April 2011.
[26]S. Lee, S. Ahn, C. J. Whang,S. J. Park, S. V. Atre, J. Kim, and R. M. German, "Effects of Process Parameters in Plastic, Metal, and Ceramic Injection Molding Processes", Korea-Australia Rheology Journal, Vol. 23, No. 3, pp. 127-138, September 2011.  
[27]S. Lee, “A Genetic Algorithm for the Container Pick-Up Problem”, IE Interafaces, Vol. 24, No. 4, pp. 362~372, December 2011.
[28]K. C. Kim, J.U. Sun and S. Lee, "Hierarchical approach to Vehicle Routing and Scheduling with Delivery and Installation using the Genetic Algorithm", International Journal of Industrial Engineering: Theory, Applications and Practice, 2011 (in press).
[29]S. Laddha, C. Wu, S. V. Atre, S. Lee, K. Simmons, S. J. Park, and R. M. German, “Characterization of Alumina Feedstock with Polyacetal and Ethylene-Propylene Wax Binder Systems for Micro Powder Injection Molding,” Powder Metallurgy, 2011 (under preparation)
[30]Lee, S., Lim, H.P., and Kim, K.C., “A Genetic Algorithm for Heterogeneous Vehicle Routing Problems from Multiple Depots with Split Deliveries”, Computers and Operations Research, 2011 (under preparation)
[31]Lee, S., Lim, H.P., and Kim, K.C., “Robust Parameters Optimization for Genetic Algorithm of Multiple Depot Heterogeneous Vehicle Routing Problems Allowing Split Deliveries” Computers and Operations Research, 2011 (under preparation)
[32]Lee, S., Lee, H.G., and Park N., “A Framework for Online Simulation for Sustainable Manufacturing”, submitted to Int. J. of Service Operations and Informatics (under preparation)
[33]N. Park and S. Lee, “Ambient Intelligent Models to Remote Resource Control and Software Maintenance in Manufacturing Globalization”, Int. J. of Service Operations and Informatics, Vol. 5, No. 3, pp. 291-311, July 2010
[34]S. J. Park, S. Ahn, T. G. Kang, S. T. Chung, Y. S. Kwon, S. H. Chung, S. G. Kim, S. Kim, S. V Atre, S. Lee, and R. M. German, “A Review of Computer Simulations in Powder Injection Molding,” International Journal of Powder Metallurgy, Vol. 46, No. 3, pp. 37-46, May 2010. (30 * 1.25)
[35]S. G. Laddha, C. Wu, S. J. Park, S. Lee, S. Ahn, R. M. German, and S. V. Atre, “Characterization and Simulation of Macroscale Mold-filling Defects in Microminiature Powder Injection Molding,” International Journal of Powder Metallurgy, Vol. 46, No. 3, 2010, Vol. 46, No. 3, pp. 49-58, May 2010. (30 * 1.25)
[36]Urval, R., Lee, S., Atre, S.V., Park, S., and German R.M, “Optimization of Process Conditions in Powder Injection Molding of Microsystem Components using a Robust Design Method: Part II. Secondary Process Parameters”, Powder Metallurgy,Vol. 53, No. 1, pp. 71-81, March 2010. (70*1.25)
[37]S. Ahn, S.J. Park, S. Lee, S.V. Atre, and R.M. German, "Effect of Powders and Binders on Material Properties and Molding Parameters in Iron and Stainless Steel Powder Injection Molding Process," Powder Technology, Vol. 193, No.2, pp.162-169, July 2009 (30*1.25)
[38]Laddha, S., Vallury, S., Lingam, G., Lee, S., Simmons, K., Thomas, P., Levenfeld, B., Varez, A., Park., S., Ahn, S., German, R.M., Atre, S.V., “Characterization of Alumina Feedstock with Polyacetal and ethylene-propylene wax binder systems for micro powder injection moulding”, Powder Injection Molding International, Vol. 3 No. 3, pp. 64-70, September 2009.
[39]Urval, R., Lee, S., Atre, S.V., Park, S., and German R.M, “ Optimization of Process Conditions in Powder Injection Molding of Microsystem Components using a Robust Design Method: Part I. Primary Process Parameters ”, Powder Metallurgy, Vol. 51 No. 2, pp. 133-142, June 2008. (70*1.25)
[40]Wu. C., Atre, S.V., Laddha, S., Lee, S., Simmons, K., Park, S., German R.M., and Whychell, Sr. D.T., “Material Homogeneity in Powder Injection Molded Ceramic Microchannel Arrays”, Powder Injection Molding International, Vol. 2 No. 2, pp. 68-73, June, 2008.
[41]Lee, S., “Locating Idle Vehicles in Tandem-Loop Automated Guided Vehicle Systems to Minimize the Maximum Response Time”, Industrial Engineering & Management Science 6, No. 2, pp. 125-135, 2007.
[42]Lee, S. and J.A. Ventura, “Construction of c-Broadcast Networks,” Telecommunication Systems 24, No. 1, pp. 47-59, 2003 ? SCI.
[43]Lee, S. and J.A. Ventura, “An Algorithm for Constructing Minimal C-Broadcast Networks,” Networks 38, No. 1, pp. 6-21, 2001 ? SCI.
[44]Lee, S. and S. Park, “Development of Data Structure and Integrated Modules for Projective Scaling Algorithms for LP,” Journal of Special Interest Group on Information Technology, The Korean OR/MS Society, Vol. 6, No. 1, pp. 40-54, 1993